starry starry night

Hello there again ---- It Teresa - and I'm back with a new item to talk about this week. 

It's a constellation pendant.

I read lots of blogs and decor reports and noticed a trend for constellation items --- these can be for your zodiac symbol if you like, but in my case I chose my constellation for sentimental reasons. The very first one I was able to identify (and still the easiest for me to spot) was Orion.

So let's gather our supplies
- a teardrop acrylic bezel
- vintage black embossing powder
- embossing powder adhesive 
- glastique gloss glaze
- fine applicator tip 
- pointed tweezers
- interchangeable bails 
- a silk necklace cord

you will also need a
- heatgun
- tiny flat back rhinestones
- a fine point permanent marker (I used a sharpie)

 There are a lot of pictures - but this is really easy to do.

I printed a picture of the constellation I wanted to use and then shrunk it to fit the bezel size on my copier.

Gathered my supplies. (I pulled out Matte Glastique first but ended up using the gloss)

The Acrylic Bezels come with this blue protective coating on each side that peels off before use. You can see through it. So I simply placed my bezel with the blue coating over my picture and marked the constellation points with the Sharpie. Then carefully peeled off both sides of the coating.  Keep this marked piece.

Pounce on the adhesive all over the front of the bezel and cover with the Vintage Black Embossing powder. The Vintage Black Powder is a gorgeous Black, Gold, and Silver mixture.

Things to remember here  ----- do NOT squeeze the adhesive bottle, a simple pouncing motion is perfect and ALWAYS roll the powder jar to mix the colors before you sprinkle your powder.

I used two coats of the powder and adhesive and learned that you can move the pattern around a bit with the air flow of the heat gun if you are going for a smooth finish like I was.

The longer you heat the powder the more smooth the finish is. A quick set leaves lots of texture. 

If you look closely at the picture above (the arrow), you will see two little place that the powder did not cover. Here's the fix.

I took a cotton swab and dabbed more adhesive in the thin area and than used my tweezers to pick up small amounts of the powder to fill just those areas.  (sorry - this picture is a little blown out, but I tried and tried to get a better exposure and being that close, it just didn;t happen) Reheat and ----

Here you have a really pretty representation of the night sky.  I did use my heat gun to "push" the powder around to get those two darker areas.

Take that marked piece of the protective coating and align it with the now covered bezel. (Be sure your orientation of the constellation is correct) Using something sharp (I used the point of the tweezers), press the star pattern into the enamel. The enamel is soft enough to take this pointed pressing and you will be able to feel/see the little indented areas for the next step.

Using the fine point applicator, dot the Glastique on those marked places and add your rhinestone "stars"

If you look closely (again see the arrow), you can spot the little indented places for the stars.

Let this dry -

After the stars dry, coat the entire front with more of the glastique. Let this dry completely.

Another tip ---- I have a cat who loves to help and can be a disaster for drying finishes. I grabbed a small clear bowl from the kitchen and cover my shape with that while it dries.

I added the pendant bail and a hung mine on a black silk necklace.

I love the Globecraft and Piccolo bails - they are interchangeable so you can switch your pendants as often as your mood changes.

I would love to see your versions of the Constellation pendant.

You can leave comments here or also on the Globecraft and Piccolo Facebook Page.

I'll see you next Thursday, but please visit everyday. There are lots of inspiring projects here.

Have a great day.

Life is Beautiful

Teresa (aka MaggieGraceCreates)